(based on 15 reviews)
of respondents would recommend this to a friend.
Reviewed by 15 customers
Displaying reviews 1-10
Back to top
Previous | Next »
from Austin, Texas
Comments about Ring Adjusters - Set Of 5:
To protect rings form loss
Bottom Line Yes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
Adjusters a Disappointment
from Southwestern Pennsylvania
About Me Classic, Comfort-Oriented, Practical
These ring adjusters are very stiff and there are no instructions included with them. I was not sure if I should cut them or try to use the entire piece in my rings. Since the full length made the rings too tight I did cut them and then they would not stay on the rings. As soon as my finger slipped into the rings the adjusters fell out.
Bottom Line No, I would not recommend this to a friend
(2 of 2 customers found this review helpful)
Unable to get any of the sizes to fit finger much less in ring itself. This was a real waste of money. Would NEVER recommend.
(4 of 5 customers found this review helpful)
works with modification
Requires dremel tool, cigarette lighter, and a nail clipper.Works well after modification. Initial product reduces size by 2 (ex: makes a 8.5 ring into a 6.5 ring).Use nail clipper to cut adjuster down to proper length. Lay adjuster inside ring. Hold ring horizontal 6 inches over cigarette lighter and let lighter heat the adjuster up until you can form it to the shape of the ring. Then take dremel tool (with sander bit) to shave the inside of the adjuster down to proper size.
(1 of 1 customers found this review helpful)
This did not work for me
By Barb the mom
About Me Practical
I used the ring band after about a hour my ring was loose because the ring adjuster came off. the idea of this product is great if only it worked.
By Leia C
The adjuster doesn't work if the ring is slightly bigger for your finger as you would only need part of the plastic band and It wouldn't stay in place. The thickness of the plastic band is not adjustable, only the length. As for some other costumers, it didn't solve my problem and wasted my money
(6 of 6 customers found this review helpful)
PERFECT--BENDING SOLUTION IS EASY
from NEW YORK
FITS PERFECTLY AND IS INVISIBLE. NOW IT MAY BE DIFFICULT TO BEND. SOLUTION IS TO FIT IT INSIDE THE RING AND USE A SMALL CLOTHING STEAMER TO SOFTEN PLASTIC AND BEND IT TO SHAPE. I USE A TWEEZER OR PINCHED NOSE PLIER TO HOLD IT IN PLACE WHILE STEAMING. IT WILL BEND EASILY. KEEP IT INSIDE RING WHEN NOT IN USE TO RETAIN SHAPE. YOUR WELCOME!!!
from Des Moines, Iowa
About Me Career, Comfort-Oriented, Modern, Stylish
I live in the Midwest. A ring was given to me by my husband for Christmas (yes he did good). It is a little big right now,but I hate to size it down. The Midwest is humid in the Summer,and I think the ring will fit perfectly then. These little guards go in and can be removed so easily.I am even using one on my wedding ring to keep it in place also. Great for anyone that has large knuckles, water retention or lives in humid environments.
(4 of 4 customers found this review helpful)
Clearly sizing is everything!!!
By Midge the Modifier
from Ft Lauderdale, Fla
About Me Classic, Comfort-Oriented, Modern, Practical, Stylish
If you follow the Instructions - you will haveINSTANT resolution to your sizing problem withrings in a most cost-effective way!! Thank you
not a very good design
from Colorado Mountains
I bought this for my Mom who has lost weight and her rings are loose. A jeweler charges a lot to size a ring. This is not easy for her or me to use. You have to install this on the ring after you put the ring on, then you need to remove it to adjust the size or remove the ring.Much easier to use if you have another person help you. Sort of works once you get it installed correctly.Since there are only a few of this type of product and it is very inexpensive, try it, it may work better for you.