(based on 12 reviews)
of respondents would recommend this to a friend.
Reviewed by 12 customers
Displaying reviews 1-10
Back to top
Previous | Next »
works with modification
Comments about Ring Adjusters:
Requires dremel tool, cigarette lighter, and a nail clipper.Works well after modification. Initial product reduces size by 2 (ex: makes a 8.5 ring into a 6.5 ring).Use nail clipper to cut adjuster down to proper length. Lay adjuster inside ring. Hold ring horizontal 6 inches over cigarette lighter and let lighter heat the adjuster up until you can form it to the shape of the ring. Then take dremel tool (with sander bit) to shave the inside of the adjuster down to proper size.
Bottom LineYes, I would recommend this to a friend
Was this review helpful? Yes / No
- You may also flag this review
This did not work for me
By Barb the mom
About Me Practical
I used the ring band after about a hour my ring was loose because the ring adjuster came off. the idea of this product is great if only it worked.
Bottom LineNo, I would not recommend this to a friend
By Leia C
The adjuster doesn't work if the ring is slightly bigger for your finger as you would only need part of the plastic band and It wouldn't stay in place. The thickness of the plastic band is not adjustable, only the length. As for some other costumers, it didn't solve my problem and wasted my money
(1 of 1 customers found this review helpful)
PERFECT--BENDING SOLUTION IS EASY
from NEW YORK
FITS PERFECTLY AND IS INVISIBLE. NOW IT MAY BE DIFFICULT TO BEND. SOLUTION IS TO FIT IT INSIDE THE RING AND USE A SMALL CLOTHING STEAMER TO SOFTEN PLASTIC AND BEND IT TO SHAPE. I USE A TWEEZER OR PINCHED NOSE PLIER TO HOLD IT IN PLACE WHILE STEAMING. IT WILL BEND EASILY. KEEP IT INSIDE RING WHEN NOT IN USE TO RETAIN SHAPE. YOUR WELCOME!!!
(2 of 2 customers found this review helpful)
from Des Moines, Iowa
About Me Career, Comfort-Oriented, Modern, Stylish
I live in the Midwest. A ring was given to me by my husband for Christmas (yes he did good). It is a little big right now,but I hate to size it down. The Midwest is humid in the Summer,and I think the ring will fit perfectly then. These little guards go in and can be removed so easily.I am even using one on my wedding ring to keep it in place also. Great for anyone that has large knuckles, water retention or lives in humid environments.
Clearly sizing is everything!!!
By Midge the Modifier
from Ft Lauderdale, Fla
About Me Classic, Comfort-Oriented, Modern, Practical, Stylish
If you follow the Instructions - you will haveINSTANT resolution to your sizing problem withrings in a most cost-effective way!! Thank you
not a very good design
from Colorado Mountains
I bought this for my Mom who has lost weight and her rings are loose. A jeweler charges a lot to size a ring. This is not easy for her or me to use. You have to install this on the ring after you put the ring on, then you need to remove it to adjust the size or remove the ring.Much easier to use if you have another person help you. Sort of works once you get it installed correctly.Since there are only a few of this type of product and it is very inexpensive, try it, it may work better for you.
Only one that I have found that works.
from Bloomington, In
About Me Modern
It really works well with all ring sizes as you get several widths....
Didn't work for me
from Detroit, MI
About Me Comfort-Oriented
For regular sized rings this product would probobly work well. But for my ring and size it proved uncomfortable and impractical, being that I have to take my ring off and put it back on for various reasons throughout the day.
Tough to use These
from Post Falls, Idaho
I would not recommend this item as a ring size adjustor. I never could figure out how to use it and have just put them away